Doucet's BT3 return conveyors can be
added to edgebanders, shaper/sand-ers, single-end tenoners, planers, and
wide belt sanders. They are available
in five roller length models, 24, 30, 36,
48, and 60, and the receiving section is
adapted to the maximum panel length.
Made of non-marring durable PVC
and individually driven by wrap-around
polymer belts, the receiving rollers are
equipped with a down stroke mechanism.
The return rollers are 2 inches lower than
the pass line on the equipment in order to
avoid interference when overlapping pan-
els are traveling in opposite directions.
IWF Booth #5535
Fan for hazardous areas
SonicAire offers the SA XD2 fan, which is
approved for operation in Class II, Division 2 locations. The company’s fan systems use proprietary BarrierAire technology to prevent combustible dust buildup in
overhead and hard to reach areas. Along
with reducing manual cleaning expenses
for a facility, the company says the SA
XD2 also helps facilities maintain compliance with relevant NFPA and OSHA
regulations and help keep employees
safe from combustible dust hazards.
IWF Booth #8419
says its RTA
saves hours of panel purchasing, configur-
ing, and processing time. The company
uses CNC machinery to manufacture
the custom boxes to within 1/1000th of
an inch specifications. No clamping is
required; the full access boxes use Lamello
P- 14 clip assembly and the face frames use
glue and staple assembly. Formaldehyde-
free PureBond hardwood plywood is used
for the RTA components.
IWF Booth #822
Space Saving Vertical Cutting
Versatile: Multiple Models & Applications
Free up your CNC See us at IWF Booth #6569