Vertical CNC machining center
Holz-Her says the Evolution Vertical CNC
machining center provides four-sided machining with a workpiece holding system
that leaves no pressure marks from the
clamps. With its patent-pending vacuum
clamping system, the Evolution provides
vertical and horizontal drilling, saw cutting
and routing without reclamping. It has
a processing dimension of 3,200mm in
direction X and 920mm in direction Y.
IWF Booth Number #6034,6452
Bits for MDF doors
Vortex Tool Co. offers a variety of insert
router bits for MDF door production. By using tools in combination, solid doors can be
created with the appearance of five-piece
construction. A complete selection of outside
edges, inside treatments, and raised panel
profiles are in stock and ready for shipment.
IWF Booth Number #4434
Giardina has been providing finishing tech-
nologies for more than 40 years. Spray
systems, coaters and more are available
for finishing flat or raised panels, doors,
windows, profiles or 3-dimensional pieces.
IWF Booth Number #4867
is capable of
a paint-quality surface finish in a 40mm
diameter from stock. Featuring optional
PCD inserts for longer tool life, the tool is
equipped with four-sided solid carbide
inserts with a corner and edge radius. It
is capable of planing MDF, solid wood,
Duroplastics, and Thermoplastics.
IWF Booth Number #4847
Easy Close Device provides
smooth soft closing
concealed drawer slides
FULTERER USA INC.
542 Townsend Avenue
NC 27263-4552, USA
T + 1 336 431 - 4646
F + 1 336 431 - 4620
Fulterer offers a complete selection of undermount
drawer slides ideal for kitchen drawers.
Custom lengths for closets are also available.
Choose the FR 3001 for face frame
cabinets or the FR 3002 for use with
See us at IWF Booth #2146