Laserable wood panel line
Laser manufacturer Trotec Laser is expanding its offerings with the addition of solid
wood panels, panels with authentic
wood veneer, plywood panels, and MDF
to its portfolio of single-ply and multi-ply
laser engraving and cutting materials. The
company says the expansion of its materials business makes Trotec a one-stop
resource for high-speed laser equipment,
high-quality engraving materials, and application support.
Bingaman Lumber offers 13 species of
North American hardwoods including
smooth-grained Cherry hardwood. Versatile for machining, finishing, and bending,
and available with customization options,
Cherry features a rich, red hue that deepens over time.
2-axis dimensional measuring system
Accurate Technology's Pro Table-CAB2
system uses two ProScale measuring
systems placed in an X-Y configuration.
With options that include a third axis
measurement system for drawer depth,
or an angular measurement system for
out-of-square measurements, Pro Table
is available in three configurations, the
CAB, the CAB V, and the CAB S. The
Pro Table-CAB model uses a ProScale LCD
digital readout on each of the measuring
axes. The readouts are each powered
by a lithium battery, making the entire
measuring system portable.
Variable feed moulder
Available from Williams & Hussey, the
Model 206 Molder features 0-19 fpm
variable feed and multi-pass capabilities, for a smooth and clean finish. The
machine can be used for straight, curved
or eliptical mouldings, with a maximum
profile depth of 3/4 in., and a maximum
profile width of 6-3/4 in. An optional mobile base is available. W&H also offers
in-stock and custom knives.
PROUDLY MADE IN THE USA!
Toll-free in the US - 844.801.2732
Visit us at pmksystems.com Pictures are similar but may not be exact.
Up to 200 pre-programmable settings
for proper configuration of tooling &
Servo drives on both spindles for
proper location to tooling (to 4. 5”
movement up and down spindle)
Servo drive to adjust back fence ( 2”
movement in & out for proper location
for different tooling diameter)
( 4) HSK 63F Spindles/
( 2) 7. 5 HP 230/460 volt motors
UNLIMITED LENGTH OF PART
Tool holder/Milling arbor 1. 25”
Length of spindle 102mm,
4“ usable spindle
Small footprint - 59” side x 32“ deep
x 63” high
The C-1203 HSK Servo allows you
to stack tooling
Machine weight 2,639 lbs. (+/-)
PMK’s MOST ADVANCED MACHINE
THE PMK C-1203 HSK SERVO.