Dust filter bags
Filter Co. says
regain lost suction
and capture more
of the fine dust
particles that are
escaping into the
bags. AFF says
its high efficiency
filters can greatly
improve the per-
formance of any
collector by offering maximum air relief
while still capturing dust particles as fine
as 1 micron.
Dust collector with Smart Boost
Oneida Air Systems has introduced the
Dust Gorilla Pro with Smart Boost, a patented technology that monitors the system
for any suction loss and automatically
adjusts the fan motor's speed to compensate. The Dust Gorilla Pro can be well
suited for CNC applications where long
lengths of flex hose and mixed dust port
sizes are common. It offers various features including a wireless radio frequency
remote control, a fully seam-welded
heavy gauge steel cyclone separator, a
single-piece molded fan housing, and a
35-gallon steel waste drum.
Dust collection system
Harvey Industries says its G700 Gyro Air
Dust Processor collects 99.9% of wood dust
particles before the air reaches the pleated
filters. New to the U.S. market, the Gyro Air
uses axial centrifugation to spin the air/dust
stream to over 4,000 RPM separating dust
from the air. Internal working parts keep the
decibel levels between 61 and 72dB.
developed to accommodate waste reduc-
tion in a small- to medium-sized shop. The
Woodchuck features a large hopper for
material loading and a solid steel rotor to
ensure reliable shredding at a consistent
throughput rate. The machine can be
loaded and left to run without supervision.
Operators looking for more flexibility and capacity should consider the 72GP
Glue Pot Edgebander. This dependable glue pot machine with adjustable
glue extrusion performs similar to other units costing thousands of dollars
more. It can apply polyester, PVC, wood or single laminate strips up to 1mm
thick on edges up to 3-1/2 inches wide and parts as short as 6 inches.
• Anodized glue pot interior for ease of
• Digital P.I.D. temperature control to
reduce glue overheating and burning
with standby temperature mode.
• Short 10-12 minute glue heat up time.
• Accutrim edge trim system uses
industrial duty trim router motors to
ensure quality finish.
• Easy to set-up,
Heavy Duty Glue Pot Edgebander for Small to
Medium Sized Woodworking Shops Under $10,000
www.mockett.com • 800-523-1269
Polished Chrome, Satin Chrome, or Matte Black
Your f o r Fine
4" height x 1" dia